Legend LDVD5.1A, Руководство пользователя

Страница: 12 / 24

Once your DVD player is connected with your TV and the power supply plugs of various
devices have been plugged into the power sockets, and the batteries have already been
inserted into the remote control, you are ready to operate the DVD player.
Turn on the power supply to the TV.
1. Press POWER button on DVD player to turn on power.
Wait a moment and switch the TV to the relevant video input mode (VIDEO IN) with the
TV remote control.
2. Press OPEN/CLOSE button on the player or press button on the remote control to eject
the disc tray.
When the tray is automatically ejected, place the disc in the tray with the label side facing
up (see the following). You can only place one disc each time.
3. Press PLAY button
The player will retract automatically the tray and start reading the disc, recognize the
different format automatically and display the results on the VFD in the front panel of the
player. Then the player starts the playback of the disc content automatically. If content or
menu appears, you can use the UP, DOWN, LEFT, RIGHT buttons on the remote control to
specify the items to be played, then press ENTER button to start the playback or select
directly with numbers.
Press MUTE button to turn off the audio output of the player.
Press MUTE button again to turn it on.
During the playback, press or VOLUME- button to adjust the volume of the
player.
During playback, press PAUSE button to pause the playback, press PLAY or PAUSE to
resume play.
5