Legato Legato Networker, Руководство по восстановлению

Страница: 69 / 194

Legato NetWorker, Release 7.0
Disaster Recovery Guide
Chapter 4: Windows Disaster Recovery
4
69
autochanger does not support the -E option (to reinitialize the
element status), use the sjiielm command to initialize the
element status.
d. If you need to determine which volume contains the bootstrap,
inventory the autochanger by running the nsrjb -Iv command
from the command prompt. If you know the slot number where
the bootstrap is located, use the nsrjb -Iv -S # command to
inventory that particular slot.
e. If the device the NetWorker server is to use is connected to a
remote storage node, the storage node device needs to be
configured. For details, refer to the Legato NetWorker Installation
Guide, Microsoft Windows Version.
• If you are using an autochanger with Removable Storage enabled:
a. On the desktop, right-click My Computer and select Manage.
b. In the left pane of the Computer Management window, expand
Storage\Removable Storage\Physical Locations.
c. Right click the icon for the autochanger and select Inventory.
d. Minimize (but don’t close) the Computer Management window.
e. After the Removable Storage inventory is complete, start the
NetWorker Administrator program and select Devices on the
Configure tab.
f. In the Devices window, right-click the Devices icon and select
Create.
g. In the Create Devices dialog box, create a stand-alone NetWorker
Device resource for each drive in the autochanger.
h. In the Computer Management window, double-click the icon for
the autochanger (under Storage\Removable Storage\Physical
Locations). Icons for the autochanger’s volumes appear in the
right pane.
i. Right-click the icon for the volume that contains the bootstrap
and select Mount.
3. In the NetWorker Administrator program, configure the Client resource
for the NetWorker server. Set the browse and retention policies to a time
value that covers the oldest save sets being using for the recovery. This
allows you to recover all of the NetWorker server’s records with the
mmrecov
command.