Legato Legato Networker, Руководство по восстановлению

Страница: 42 / 194

Legato NetWorker, Release 7.0
Disaster Recovery Guide
3
Prerequisites
42
Important: Do not recover any UNIX operating system boot files that should
not be overwritten during a recovery. For more information on boot files, see
“Prerequisites” on page 28 .
4. To set the recover options, select Recover Options from the Options menu.
5. In the Recover Options dialog box, selecting Overwrite Existing File.
Important: If you did not set the recover options, you must select the
Overwrite Existing File option when the Naming Conflict dialog box appears
during the recovery process. To enable automatic overwriting of files with the
same name, select the Suppress Further Prompting option in the Naming
Conflict dialog box.
6. Select Start.
7. Reboot the computer when the recovery is complete. The computer should
now be restored as it was prior to the disaster.
Note: By default, the directed recover option is enabled when you install the
NetWorker client. If the directed recover option was disabled on the client
before the disaster, you need to explicitly set this option to disable directed
recoveries to this client. This option is set through the nsradmin command. For
more information about setting the disable directed recover option on the
NetWorker client, refer to the Legato NetWorker Administrator’s Guide, UNIX
Version.
Task 3: Perform a Test Backup and Recovery
To test the NetWorker storage node backup and recovery process:
1. Perform a test backup using each of the Legato backup utilities
incorporated into the backup solution.
2. Perform a test recovery using the Legato utility used to back up the data.
For details, refer to the Legato NetWorker Administrator’s Guide.