11
INSTALLATION
4.4. CONTROL PANEL
Key
Descriptions
Power
Power on/Power off
Source
Source selection (toggle)
►
Menu Right/
◄
Menu Left/Volume -
▲
Menu Up
▼
Menu Down
Menu/Exit Menu/Exit selection
4.6. INPUT AND OUTPUT CONNECTOR
1
Power
Connects the display to power here.
2
Touch USB 1
A standard, Type B USB port for the touch functionality of the display.
Automatically links to HDMI 1, 2, VGA or DisplayPort
3
Service USB port
A standard type A USB port for service purposes like e.g. firmware
upgrades. Only to be used by, or if instructed by, an authorized Legamaster
service technician.
4
DisplayPort
DisplayPort 1.1a and DisplayPort-HDCP 1.1 compliant, SD/HD input for
connecting SDTV, EDTV or HDTV component video sources.
5-6
HDMI 1, 2
HDCP-compliant digital video inputs for connecting HDMI sources.
7
HDMI out
HDCP-compliant digital video inputs for connecting HDMI
sources.
8
VGA (D-Sub 15 pin)
Connects components that have RGB or component output jacks,
such as a personal computer or external
9
PC Audio In
Connects the audio output from a personal computer here.
1
2
11
4
3
5
6
12
13
15
14
16
7
8
9 10
4.5. STATUS LED
LED Illumination
Condition
Green
Normal operation
Blinking Orange
No signal
Orange
Power Saving
Off
Power off
AC off
Note:
If the Status LED is set to „Off“ in the OSD
menu, the Status LED will not operate.
10
IR Extender
Connects the IR Extender cable provided with the display to this input.
11
Audio Out
Connects external, powered speakers or an external audio
receiver/amplifier.
12
SPDIF
Connects external, powered digital speakers or audio receiver/amplifier.
13
Touch USB 2
A standard, Type B USB port for the touch functionality of the display.
Linked to HDMI 3 in Auto setting.
14
HDMI 3
HDCP-compliant digital video inputs for connecting HDMI sources.
15
RS-232C
A female, 9-pin D-sub connector for interfacing with a PC or control system.
15
Ethernet
An RJ-45 connector for interfacing with a PC or home theater automation/
control system via a Cat 5 cable.
XTX-8600 – USER MANUAL – ENGLISH