15
Installation
This Quick Start Guide is intended assist you with the initial installation and set-
up of your
LXMonarch
HD recording system. Comprehensive user guides,
software downloads, development tools and product registration are available
directly from the factory. This material can be accessed through links provided in
the resource section of this guide.
Please review the Room Configuration Guide on pages 5 and 6 will assist with
camera and microphone placement, the Hardware Overview on pages 7 thru 12
for component and cable identification and the Component Interface Diagrams
on pages 13 and 14 for system component interconnection.
Hardware Interconnection
Position the equipment on a flat surface in a temperature controlled environment,
adjacent to the interview room. Place the powered speakers on each side of the
LED monitor, with the recorder positioned centrally in the foreground. The master
clock can be placed on top of the SDI time/date inserter to the side of the system,
while the audio processor and UPS behind and out of the way.
System Power:
Connect the supplied multi-outlet power strip to a battery backup outlet on the
UPS, and the UPS to a 120V AC mains outlet. The recorder, master clock,
time/date inserter, (LCS users: SDI/HDMI Converter), audio processor and
camera power supplies should be connected to the power strip and battery
backup outlets, while the LED monitor and speakers may be connected to the
surge protected outlets. In the event of a significant power interruption, all critical
components will continue to function until recording is safely ended.
Component Interconnect:
HDMI:
Connect an HDMI cable from
HDMI OUT
on the recorder to
HDMI IN
on
the LX LED monitor. (Monarch LCS users: Connect a second HDMI cable from
the SDI/HDMI Micro Converter to
HDMI IN B
on the recorder).
BNC:
Connect the 3’ BNC cable from the
ESE OUTPUT
on the Master Clock to
the
ESE INPUT
on the SDI Time Code Inserter. Connect the 6’ BNC cable from
the
SDI OUTPUT
on the SDI Time Code Inserter to
SDI IN
on the recorder
(Monarch LCS users: to
SDI IN A
).
AUDIO:
Connect the 1/8” RCA stereo cable from RCA
L/R Line Out
on the audio
processor to
AUDIO IN
on the recorder. Connect the 1/8” stereo cable (supplied
with the powered speakers) from
AUDIO OUT
on the recorder to
FROM
COMPUTER
on the rear of the right speaker. Connect the attached 1/8” stereo
cable from the left speaker to the
TO LEFT SPEAKER
jack on the right speaker.
Содержание LXMONARCH
