background image

PRECAUTIONS AND MAINTENANCE

.1.This unit is designed for negative ground operation only. The equipment can
    be used safely, if the negative terminal of the battery is connected to the 
    vehicle metal work.
 2.Do not use speakers of impedance less than 4 ohms; and allow the speaker
    wires to be shorted together when the unit is switched on.
    Otherwise it may overload or burn out the power amplifier stage.
 3.If the car interior is extremely hot, as after being parked in the sun, do not use
    the player until the car has been driven for a while to cool off the interior.
 4.Take care of your tape cassette to preserve the quality of the recordings. Do
    not allow them to be exposed to direct sunlight. Store them in a place 
    protected from dirt and dust and avoid handing with greasy or oily hands.
    Also, keep the away from magnets, and motors of the permanent magnet type.
 5.It is not advisable to use cassette tapes longer than C-60(30 minutes per side)
    in automobile players, since the tape is too thin and tends to become easily
    entangled. Always remove cartridge from your tape player as soon as play is
    finished.
 6.The capstan and tape head should be cleaned about once every six months
    with a soft cloth or cotton-wool swab, moistened with alcohol.
    This will serve to maintain the richness and clarity of sound, and prevent loss 
    of volume. Do not use a  screwdriver, or ferrous metal rod , in carrying out the
    above cleaning. See illustration.

 

7.A loosely wound cassette tape will get damaged. Prior to using such tape,
    tighten it in a manner as guided by Fig. 2.A carelessly would cassette tape will
    cause unnecessary pressure on the tape resulting in the cassette springing out
    while the tape is running .For prevention, rewind the tape through fast for
    warding or rewinding.

17.RPT/METAL BUTTON
     In tape play mode, If a metal tape is used, press METAL button
     to make the player in metal play mode, and MTL is indicated on LCD. 
     In CD player mode, press it to play the current track repeatedly. Press
     it again or eject the disc to cancel this mode.
     In CD changer mode, press it to play the current track repeatedly. Press 
     it again to play the current disc repeatedly. Press it thirdly to cancel this 
     mode. 

18.RDM/PAUSE BUTTON
     In CD player mode, press it to play the track in random order. Press the
     TRACK + or - button to select another random track. Press it again or 
     eject the disc to cancel this mode.
     In CD changer mode, press it to play tracks on the current disc in 
     random order. Press it again to play tracks on the full disc in random 
     order. Press it thirdly to cancel this mode.
     In tape mode, press it to pause tape playing, press it again to resume 
     tape playing.

20.RELEASE BUTTON
     Press it to detatch the front panel when you want to take it away.

21.BAND BUTTON

    Press it to switch from tape, CD player or CD changer mode to radio, and
    the LCD screen will be shown as below:

           FM 1     FM 2      FM 3       MW(AM) 1       MW(AM) 2

Содержание LCDCS94







Отзывы: