Screw
Swivel cover
Screw
Belt cover
Belt
Small gear
Replacement
reel hose RP005051-FZ
C-clip
Washer
Swivel body, with
hose, hose clamp
and bend restrictor
Replacement
reel hose RP005051-FZ
Replacement
reel hose RP005051-FZ
Axle shaft
Pull on reel hose when installing swivel on axle shaft
Cover alignment slot
DETAIL C
small
gear
A
C
B
DETAIL B
DETAIL A
Replacing Extension Hose (part 10):
1.
Install belt
2. Install gear cover
3. Install belt cover
4. Install all 3 screws
5. Pull on reel hose
RP005051-FZ
to release from latch
6. Slowly allow reel spring to retract reel hose into reel
Replacing Extension Hose (part 9):
Before releasing reel lock to retract new hose into reel:
1. Remove hose stopper from old hose
2. Re-install hose stopper on new hose
3. Position stopper approximately 2 ft. from end of hose
4. Re-install the small gear (see DETAIL A)
5. Rotate gear clockwise ONLY!
6. Rotate until the layering window's right edge is aligned
with left side of housing mid section rib (see DETAIL B)
Replacing Extension Hose (part 8):
1. Install swivel cover
2. Align tab on cover to slot on drum (see DETAIL C)
3. Install all 4 screws
REPAIR INSTRUCTIONS (CONT.)
Replacing Extension Hose (part 7):
1. Pull on reel hose
RP005051-FZ
2. Guide swivel toward axle shaft
3. Slip swivel onto axle shaft
4. Install washer
5. Install c-clip