Bend restrictor
Old reel hose
to be replaced
REMOVE OLD HOSE BY
PULLING THIS DIRECTION
Hose clamp
C-clip
Washer
Swivel body, with
hose, hose clamp
and bend restrictor
Screw
Swivel cover
Screw
Belt cover
Belt
Small gear
Old reel hose
to be replaced
Old reel hose
to be replaced
Old reel hose
to be replaced
ST
E
P
1
ST
E
P
2
ST
E
P
3
And through
opening in drum
Extend as needed for
swivel re-installation
Insert replacement reel hose
RP005051-FZ from
this direction, through layering window rollers
Bend restrictor
Replacement
reel hose
RP005051-FZ
Hose clamp
Replacing Extension Hose (part 3):
1. Remove C-Clip
2. Washer
3. Swivel body, with hose, hose clamp and bend restrictor
Replacing Extension Hose (part 4):
1. Slide bend restrictor away from hose clamp
2. Loosen hose clamp and slide away from swivel
3. Remove hose from swivel
4. Remove hose from reel
Replacing Extension Hose (part 6):
1. Slide bend restrictor on hose
2. Slide clamp on hose
3. Insert swivel into hose
Replacing Extension Hose (part 2):
1. Remove:
1. 4 screws
2. swivel cover
REPAIR INSTRUCTIONS
Replacing Extension Hose (part 1):
1.
Pull on extension hose to complete extension
2. Slowly allow reel to retract hose back into reel approximately
1/2 of a full rotation
3. Pull on extension hose slowly until reel is in a latched position
4. Remove:
1.
3 screws
2.
belt cover
3. gear cover
4. belt
5. small gear
Replacing Extension Hose (part 5):
1. Install replacement reel hose
RP005051-FZ