Legacy Whirlpool LW 524 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 76

background image

30

DO NOT DIVE.

105

DO NOT DIVE.

Regular Maintenance Procedures

NOTE: These maintenance procedures are the responsibility of the spa owner to perform. These
procedures are not covered by the spa warranty.

CARE OF YOUR SPA PILLOWS

• Your spa pillows should be rinsed periodically to remove chemical residue. This helps improve

pillow lifespan and slows down deterioration of the pillows (i.e. discoloring, becoming stiff and
flaking of the material).

• If the spa will not be used for a period of time, the pillows could be removed and rinsed to pro-

long their life.

NOTE: Do not cover the spa for 15 minutes after adding chemicals as the off gas can cause damage.

CARE OF STAINLESS STEEL

Master Spas uses stainless steel in a number of our spas. Its lasting beauty and resistance to
corrosion make it an excellent material for handrails and jets faces.
With the proper care it will keep its luster for many years. All stainless steel can corrode given the
right circumstances so we have provided a guide to help you keep the stainless components in
your spa looking nice.
Stainless steel derives its ability to resist corrosion by forming a very thin transparent coating on the
surface when exposed to oxygen. This coating can be damaged by abrasive materials such as steel
wool, sand paper, and other cleaning materials that are abrasive. Chlorine salts, sulfides, or other
rusting metals can also erode this thin coating exposing the metal to corrosion.
The best defense to combat corrosion on stainless steel components in your spa is make sure that
it is kept clean and free of any chemical build up.

Always:

• Clean frequently with fresh, clean water.
• Remove any rust spots as soon as they appear with vinegar or a brass, silver, or chrome cleaner.
• Use a good car cleaning wax for extra protection.
• Leave cover removed for at least 15 minutes after adding chemicals to the spa water.

Never:

• Clean with mineral acids or bleaches.
• Clean with steel wool or any other abrasive material.
• Leave in contact with iron, steel any other metals.
• Close the cover immediately after adding chemicals to the water.

NOTE: Failure to take proper care of the stainless steel could result with them rusting. Rusting is not

covered by the warranty.

NOTE: Do not cover the spa for 15 minutes after adding chemicals as the off gas can cause

unwarranted damage. Larger dosages can require longer lengths of time to off gas. It is
recommended to check spa water more frequently to allow small dosages be added as
necessary versus large dosages being added less often.

«
...
30
31
32
33
34
...
»

Содержание LW 524













































































Отзывы:

Нет отзывов

Похожие инструкции для LW 524

Бренд: Jacuzzi Страницы: 17

Бренд: Jacuzzi Страницы: 2

Point Arena AI6060DC

Бренд: Aquatic Страницы: 1

Бренд: Aquatic Страницы: 1

Бренд: Aquatic Страницы: 1

HOTSOAK 93 AI34AIR6632HS

Бренд: Aquatic Страницы: 1

Бренд: Aquatic Страницы: 1

Бренд: Aquatic Страницы: 1

Бренд: repabad Страницы: 20

Бренд: Easy@Home Страницы: 9

Бренд: SkinFab.co Страницы: 6

Бренд: Silvercrest Страницы: 14

Бренд: Silvercrest Страницы: 74

Tara Pure Air II Bath EB10

Бренд: Jacuzzi Страницы: 2

Carbon Fiber 200

Бренд: Cal Flame Страницы: 18

Crossover Series

Бренд: Dreammaker Spas Страницы: 2

Бренд: Tylo Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды