ASSEMBLY INSTRUCTIONS
0520-945 COUNTER HEIGHT WINDSOR CHAIR
Assembly Procedures:
Tools required: Wrench #5, (see hardware list).
**Note: First read the chair leveling instructions. This is an additional assembly sheet found inside the carton.
Place all chair parts on a clean, cushioned area to prevent scratching the furniture. Make sure the feet are free of
stain, staples, screws and nails.
Assembly Steps:
Step 1: Remove the wood support from chair back frame (B).
Step 2: Remove the plastic cover on the upholstered seat. Assemble the seat frame (A) to the back frame (B).
Step 3: Assemble the left & right leg (E, F) to the front stretcher (D).
Step 4: Assemble the side stretcher (C) to the back frame (B).
Step 5: Assemble the front legs (E, F) to the seat frame (A) and the side stretcher (C).
Assembly is complete.
** NOTE: Do not tighten all the bolts until the has been put on a flat surface to adjust & level all the legs so
that they do not wobble. Once adjusted then tighten all the bolts. Do not over tighten.
LEGACY CLASSIC
FURNITURE
