
LEGA
srl
Costruzioni Apistiche – via Maestri del Lavoro 23 – 48018 Faenza
www.legaitaly.com - Tel 054626834 – Fax 054628279 – P.iva 00043230390
11 / 39
1
2
3
2.0 OPERATING INSTRUCTIONS
Place the melter directly under the uncapping machine or
beside the honey processing line.
Plug the machine into a power socket using a 5-pole three-
phase plug.
Turn on the tank 2kW heating element by acting on the
right-hand selector (3) and the grid 3kW heating element
by acting on selector (2).
Turn on the water recirculation tank by acting on the left-
hand selector (1).
If room temperature inside the workshop is at about 20°C,
20°C, allow the heating element to heat the melter for
about half an hour. Adjust this time according to any
room temperature changes. Place two containers, one for
the melted wax and one for the honey, close to the relevant
outlet.
Forks insertion points
Wax outlet
Honey outlet