Lega 10KVA, Руководство пользователя

Страница: 21 / 44

21
3.5 UPS Self-Test / Mute Operation

When UPS is on line mode, press and hold the self-test/mute key for more than 1 second, LED
light and go out circularly and orderly. UPS comes to self-test mode and tests its status. It will
exit automatically after finishing testing, LED resume.

When UPS is on battery mode, press and hold the self-test/mute key for more than 1 second,
the buzzer stops beeping. If you press and hold the self-test/mute key for one more second, it
will restart to beep again.
3.6 Panel Function Setting
UPS has setting function. It can run the setting on any mode. After setting, it will become effective
at once when meets some standards. The set information can be saved only when the battery
connected and normally turning off the UPS.
3.6.1 ECO Mode Setting

Enter the setting interface. Press and hold the function setting key for more than 2
seconds, then come to setting interface, the letters “ECO” will flash.

Enter the ECO setting interface. Press and hold the function setting key for more than half a
second(less than 2 seconds), then come to setting interface of ECO, at this time, the letters “ECO”
will light for a long time. The “ON” (or OFF) will flash. Press and hold the inquiring key
（
,
）
for more than half a second (less than 2 seconds) to determine whether the ECO
function is used or not. If used, the corresponding word is “ON”, if not, the word is “OFF”. It can
be determined by yourself.

Confirm the ECO selecting interface. After selecting ON or OFF, press and hold the function
setting key
for more than half a second (less than 2 seconds). Now, the ECO setting
function is completed and the “ON” or “OFF” will light without flash.
 Exit from the setting interface. Press and hold function setting key for more than 2
seconds, exit from the setting interface and turn to main interface.
25% 50%
75 %
100%
25 % 50 % 75 % 100%
25 % 50%
75%
100% 25% 50%
75%
100%