Lega 10KVA, Руководство пользователя

Страница: 18 / 44

18
Function setting mode:
Press and hold the key for more than half a second (less than 2 seconds): Select the set option.
※
FUNCTION SETTING key
Non-function setting mode:
Press and hold the key for more than 2 seconds: Function setting interface.
Function setting mode:
Press and hold the key for more than half a second (less than 2 seconds): Enter the function
setting option
Press and hold the key for more than 2 seconds, exit from this function setting interface.
3.2 LED Function
From left to right is inverter LED, battery LED, bypass LED and warning LED.
Warning red LED is on: UPS fault. For example: Overload beyond the allowed time, inverter fault,
BUS fault, over temperature fault etc.
Bypass yellow LED is on: UPS is alarming. For example: Bypass mode supply power and etc.
Battery yellow LED is on: UPS is alarming. For example: Battery mode supply power and etc.
Inverter green LED is on: UPS is normally powered by mains or ECO mode or battery mode.
PS: LED display detail in different mode is listed in 5 items.
3.3 LED Display Function
LCD displays as following figure.
※
Icon display area:
1. The top diagram is for load, battery, fan, fault and buzzer icon. When UPS is over loaded, the load
light will blink as same as the battery light blinks when the capacity of battery gets low or battery
is disconnected. The left icon and right icon are for load and battery capacity indication, each grid
of which represents 25%.
2. The fan icon is for fan working indication; when fan normally runs, the icon will display rotation; if
the fan is not connecting or faulty, the icon blinks;
3. Press the mute button under the battery mode, buzzer icon will blink; it will disappear under
other cases.
4. Fault icon will be on when UPS on fault mode, otherwise it will not.