background image

20

The package contains

1 ea. 

Cinderella Comfort

1 box 

Original paper bags (500 bags)

1 ea. 

Outlet air pipe, 110 mm dia. by 430 mm length

1 ea. 

Inlet air pipe, 110 mm dia. by 430 mm length

1 ea. 

T-piece, 110 mm dia. (90°)

1 ea. 

Ventilator cowl

1 ea.     Weather cap
1 ea. 

User guide

1 ea. 

Installation guide

Opening the package

Check that the package has not been damaged during transport. Contact the shipper or seller if the packaging has any holes or 
signs of damage from impact. Check the contents for visible damage.
The guarantee certificate is enclosed with the toilet. Secure your rights under the guarantee by registering. In cases of theft, 
registered Cinderella appliances will be listed in the manufacturer’s database. When registering, you will also be able to utilise the 
manufacturer’s support systems.

Transport safety strap

The ash container is equipped with a  
safety strap which must be removed 
before use as follows:

1.  Remove the front hatch
2.  Cut away the plastic straps attaching 

the ash container to the steel frame.

3.  Remove plastic straps.

Transport safety strap

Inlet air

Outlet air

Proper installation - long service life

Installing your Cinderella Comfort correctly has a num-
ber of advantages:

• 

Odour free toilet compartment  and more efficient 
incineration.

• 

Quieter operation.

• 

Avoids cold air/cold downward air draft.

 

In order to ensure the best possible incineration and 
safe operation over a longer period of time, it is  
important to install air inlet and outlet pipes correctly.
Incorrect installation may cause poor incineration, 
odours and other problems. Ensure that installation  
is performed in compliance with electrical and building 
regulations. If you are unsure of this, contact a  
professional tradesman.

Inlet / outlet air:

The internal air balance and temperature conditions
of the room will not be disturbed by the Cinderella since
the required inlet air is drawn through a dedicated inlet 
pipe and all outlet air/vapours are vented through a 
separate pipe.

If you follow the instructions carefully, 

your incineration toilet will provide good service  

for many years.

Registration

You can register your toilet on the Internet:

www.register.cinderellaeco.com

 

Содержание Cinderella Comfort









Отзывы: