LeeLen ATSC702, Руководство по эксплуатации

Страница: 23 / 40

Product Introduction
ATSC 702
22
2. Front panel touch button function
Icon Button name Function description
Position I
In Manual mode, press this button to transfer load to
position I
Position II
In Manual mode, press this button to transfer load to
position II
Position 0
In Manual mode, press this button to transfer load to
position 0
Test mode Press this button for 3 seconds to enter test function.
Auto mode
Press this button for 3 seconds to set controller as
Auto mode.
Manual mode
Press this button for 3 seconds to set controller as
manual mode.
Programming mode
Press this button for 3 seconds to set controller as
programming mode.
Increase/ up
In menu page, press this button to scroll page.
In parameter setting page.
press this key to up cursor or increase value.
Decrease / down
In menu page, press this button to scroll page.
In parameter setting page.
press this key to down cursor or decrease value..
Enter
Press this button to enter sub-menu or confirm setting
information.
Return
Press this button to return prior menu screen, press
this button for 3 seconds to lock/unlock the button.
press it can clear fault alarm when alarm occur.
3. Front panel LED
 Alarm LED (Red) –when fixed, indicates an alarm is active;
 S1 voltage status LED (Green) –S1 normal, fixed; S1 abnormal, blinking;
 S2 voltage status LED (Green) –S2 normal, fixed; S2 abnormal, blinking;
 Position I status LED (Green) –on, POSI close; off, POSI open;
 Position II status LED (Green) –on, POSII close; off, POSII open;