FCC NOTE:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two condi-
tions: (1) this device may not cause harmful interfer-
ence, and (2) this device must accept any interfer-
ence received, including interference that may
cause undesired operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR
ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS OR CHANGE
TO THIS EQUIPMENT. SUCH MODIFICATIONS OR
CHANGE COULD VOID THE USER’S AUTHORITY
TO OPERATE THE EQUIPMENT.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential installa-
tion. This equipment generates, uses and can
radiate radio frequency energy and if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communica-
tions. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined by
FCC CERTIFICATION
turning the equipment off and on, the user is
encouraged to try to correct the interference by
one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between
the equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help
To maintain compliance with FCC’s RF exposure
guidelines, this equipment should be installed and
operated with a minimum distance of 20cm
between the radiator and your body.
For 5150-5250MHz and 5725-5825MHz frequency
bands, add below statement for indoor use
warning statement on manual,
Operations in the 5150-5250MHz and
5725-5825MHz bands are restricted to indoor
usage only.
