Assembling LED module
8.
Drop the Led Module (part 19) into the Head (part 12) with the led facing outwards. Put the Glass Lens (part
15) with Seal (part 16) and Face Cap (part 17) back on the flashlights head and tighten.
9.
Reassemble the Barrel (part 5), place the Battery into the barrel and screw the Tail Cap (part 1-4) back on.
10.
That is all, enjoy the new flashlight! For a full guide going in detail through every step of the process please
check the video or contact us at: [email protected] for any questions.
The following parts are left over after the conversion to led and can be saved as a back-up.
