Steps to assembling the switch
5.
Put the Switch into the new switch-barrel (part 18).
6.
Put the new Switch assembly back into the Center Housing (part 6)
7.
Screw the Charging Module (part 11) back into the Center Housing (part 6) and tighten it.
Страница 1: ...n the Glass Lens in warm water with some washing up liquid Do not touch the inside of the reflector Dust and fingerprints will be very hard to remove without damaging the reflective surface Parts of the Maglite Magcharger flashlight 1 Tailcap 2 O ring Tailcap 3 Spare bulb in foam 4 Spring 5 Barrel with Battery 6 Center Housing 7 O ring Housing 8 Nylon Washer 9 Switch assembly with Switch 10 Switch...
Страница 2: ...flector part 14 4 Push the switch button and press the Switch Assembly with Switch part 9 out of the Center Housing part 6 Next push the switch button again and this time press the switch itself out of the assembly NOTE There are different switches each with their own difficulties Some older models have a big spring fixed to the front of the switch please cut it gently of with pliers If the switch...
Страница 3: ...ng the switch 5 Put the Switch into the new switch barrel part 18 6 Put the new Switch assembly back into the Center Housing part 6 7 Screw the Charging Module part 11 back into the Center Housing part 6 and tighten it ...
Страница 4: ... head and tighten 9 Reassemble the Barrel part 5 place the Battery into the barrel and screw the Tail Cap part 1 4 back on 10 That is all enjoy the new flashlight For a full guide going in detail through every step of the process please check the video or contact us at info ledmag nl for any questions The following parts are left over after the conversion to led and can be saved as a back up ...
