Ledj Stage Par CZ 100, Руководство пользователя

Страница: 9 / 12

www.prolight.co.uk Stage Par CZ 100 User Manual
9
Test mode:
To access the test mode, press the “MENU” button and use the “UP” and “DOWN” buttons on
the rear of the unit to show
tEst
on the LED display. Now press the “ENTER” button.
The unit will now display
AUtO
and run the fixtures test mode.
To exit out of any of the above options, press the “MENU” button.
Fixture temperature:
To access the fixtures temperature, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons on
the rear of the unit to show
tENp
on the LED display. Now press the
“ENTER”
button.
The unit will now display the fixtures temperature.
To exit out of any of the above options, press the
“MENU”
button.
Fixture hours:
To access the fixtures usage time, press the “MENU” button and use the “UP” and “DOWN” buttons on
the rear of the unit to show
FHrS
on the LED display. Now press the “ENTER” button.
The unit will now display the fixtures usage time (hours).
To exit out of any of the above options, press the
“MENU” button.
Reset factory settings:
To reset factory settings, press the “MENU” button and use the “UP” and “DOWN” buttons on
the rear of the unit to show
FACt
on the LED display. Now press the “ENTER” button and use the “UP”
and “DOWN” buttons to choose
yEs
. Press the “ENTER” button to confirm the setting. The fixture will
reset to factory default settings. To exit out of any of the above options, press the “MENU” button.
Software version:
To access the fixtures software version, press the “MENU” button and use the “UP” and “DOWN” buttons
on the rear of the unit to show
VEr
on the LED display. Now press the “ENTER” button.
The unit will now display the fixtures software version.
To exit out of any of the above options, press the
“MENU” button.
Operating instructions