Ledj Spectra Bank 4 Скачать руководство пользователя страница 3

IMPORTANT: 
            
The manufacturer will not accept liability for any resulting damages caused  
by the non-observance of this manual or any unauthorised modification to the 
equipment. 

 

  Never let the power-cable come into contact with other cables. Handle the 

power-cable and all mains voltage connections with particular caution! 

  Never remove warning or informative labels from the equipment. 

  Do not open the equipment and do not modify the equipment. 

  Do not connect this equipment to a dimmer-pack. 

  Do not switch the equipment on and off in short intervals, as this will 

reduce the system’s life. 

  Only use the equipment indoors. 

  Do not expose to flammable sources, liquids or gases. 

  Always disconnect the power from the mains, when equipment is not in 

use or before cleaning! Only handle the power-cable by the plug. Never 
pull out the plug by pulling the power-cable. 

  Make sure that the available voltage is between 220v/240v. 

  Make sure that the power-cable is never crimped or damaged. Check the 

equipment and the power-cable from time to time. 

  If the equipment is dropped or damaged, disconnect the mains power supply 

immediately. Have a qualified engineer inspect the equipment  

      before operating again. 

  If the equipment has been exposed to drastic temperature fluctuation (e.g. 

after transportation), do not switch it on immediately. The arising 
condensation might damage the equipment. Leave the equipment switched 
off until it has reached room temperature. 

  If your product fails to function correctly, discontinue use immediately. Pack 

the unit securely (preferably in the original packing material), and return it to 
your Prolight dealer for service. 

  Only use fuses of same type and rating. 

  Repairs, servicing and electric connection must only be carried out by a 

qualified technician.  

 

THIS UNIT CONTAINS NO USER SERVICEABLE PARTS… 

  WARRANTY; One year from date of purchase. 

 

OPERATING DETERMINATIONS 

 

If this equipment is operated in any other way, than those described in this manual, 
the product may suffer damage and the warranty becomes void. 

 

Incorrect operation may lead to danger e.g.: short-circuit, burns, electric shocks,  
lamp failure etc. 

 

Do not endanger your own safety and the safety of others! 
Incorrect installation or use can cause serious damage to people and property! 
 

 LEDJ SPECTRA BANK 4, 6, 8 

 

 

 

                                                 DESCRIPTION 

Содержание Spectra Bank 4












Отзывы: