Ledj Pixel Bar LEDJ73A, Руководство пользователя

Страница: 4 / 12

Setup
Operating Instructions
The LEDJ Pixel Bar is a DMX-512 controllable unit made up of high efficiency and Ultra Bright
LEDs and will operate in stand alone, master/slave, sound activated or DMX control modes.
HBR-1D Operation (optional)
To operate the Pixel Bar via the (optional) LEDJ HBR-1D controller (LEDJ123), please
ensure that the Pixel Bar has been set into “SLAVE MODE” and connect the controller to the
3-pin XLR socket on the rear of the unit.
The HBR-1D can be used in conjunction with the MB-2 Footswitch (LEDJ124), by plugging the
5-pin XLR from the MB-2 into the HBR-1D controller.
Note: please follow the user manuals supplied with the optional MB-2 and HBR-1D
controllers for details of various operation modes.
PIXEL BAR INTRODUCTION
Introduction
Features
• DMX channels: 27/24/15/9 or 6 selectable
• 504 x 5mm LEDs (R: 168, G: 168, B: 168)
• Sound control via internal microphone
• 3-pin XLR In/Out for DMX linking
• Power IEC In/Out sockets
• 14 built-in programmes & 7 static colours
• 4 push button menu with LCD display
• Master/Slave functions
• Auto run mode
• Consumption: 51W
• Beam 25 degrees
• Fuse: 1A/240V
Over view
LCD Screen
Mode Button
Set Up Button
Up Button
Down Button
Power Input
DMX In
Hanging Bracket
3.
DMX Out
Power Output