Ledj LEDJ259, Руководство пользователя

Страница: 5 / 12

Spectra Batten 12T3 Exterior Operation Modes
Operation modes
Colour mix mode:
To activate the units colour mix mode, press and hold the “M” button for 2 seconds to show “COL”
on the LED screen. Now tap the “M” button to scroll through the three separate colours, red green
and blue. To adjust the brightness of each individual colour use the “UP” and “DOWN” buttons.
The “r” represents Red, “G” = Green and B = Blue
The two digits after it are the brightness 00 to 99. Note: 00 = Off, 99 = Full on.
Examples:
If you set r, G and B to 00, the Spectra Batten 24T3 will have no LEDs on (blackout).
If you set r to 99 and G and B to 00, the Spectra Batten 24T3 will be 100% Red.
Built-in programmes:
To activate the units built-in programmes, press and hold the “M” button for 2 seconds to show
“P.01” on the LED screen. Now use the “UP” and “DOWN” buttons to scroll through the built-in
programmes from P.01 to P.07. Now tap the “M” button to select the desired speed and adjust by
using the “UP” and “DOWN” buttons. Tap the “M button once more to select the desired flash
value and adjust by using the “UP” and “DOWN” buttons.
Speed values: S.00 - S.99 (00 = slow, 99 = fast), Flash values: F.00 - F.99 (00 = slow, 99 = fast)
In “P.01” you can set a specific static colour. When in P.01, tap the “M” button and use the “UP”
and
“DOWN”
buttons to scroll through the list of built-in static colours.
0 = White (RGB) 1 = Red 2 = Orange 3 = Light Yellow 4 = Green 5 = Cyan
6 = Blue 7 = Purple 8 = Pink 9 = Yellow 10, Cool white 11, Warm white
To add strobe tap the “M” button again and use the “UP” and “DOWN” buttons to set strobe from
F.00 to F.99. To confirm your setting press the “M” button. Note: F.00 = slow, F.99 = fast.
Auto run mode
To activate the units auto run mode, press and hold the “M” button for 2 seconds to show “AUT”
on the LED screen. Now tap the “M” button to select the desired speed and adjust by using the
“UP” and “DOWN” buttons. Tap the “M button once more to select the desired flash value and
adjust by using the “UP” and “DOWN” buttons. To adjust the fading value, tap the “M button and
set the value from U.00 to U.99 by using the “UP” and “DOWN” buttons. To confirm your setting
press the “M” button.
Speed values: S.00 - S.99 (00 = slow, 99 = fast)
Flash values: F.00 - F.99 (00 = slow, 99 = fast)
Fading values: U.00 = slow, U.99 = fast.
4.