www.prolight.co.uk
HEX Par 7
User Manual
9
DMX signal interruption:
DMX signal interruption will allow the user to choose what the fixture does when it loses DMX signal.
To access DMX signal interruption press
“MENU”
until the display shows
bLnd
on the LED display.
Press
“ENTER”
to and use the
“UP”
and
“DOWN”
buttons to choose between Auto mode (
Auto
),
Hold mode (
hoLd
) and Stop mode (
StoP
). Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Display timeout:
Display timeout allows the user to choose after what period of time the display goes off.
To change the display timeout press
“MENU”
until the display shows
dISP
on the LED display.
Press
“ENTER”
to and use the
“UP”
and
“DOWN”
buttons to choose between on (
on
), 10 second
timout (
10oF
), 30 second timout (
30oF
) and 60 second timout (
60oF
).
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Software version:
To see what version the fixture is press
“MENU”
until the display shows
ver
on the LED display.
Press
“ENTER”
to and the fixture version will be displayed.
To exit out of any of the above options, press the
“MENU”
button.
Operating instructions
