Ledj Event Spot Rapid RGBW Series, Руководство пользователя

Страница: 11 / 16

www.prolight.co.uk Event Spot Rapid RGBW User Manual
11
Wireless master/slave operation:
To set the fixtures into wireless master/slave, first clear the fixtures wireless DMX memory by following
the instructions Clear wireless DMX memory .
Once all units (including the masters) wireless DMX memory has been cleared set the slave units.
To set the slave units, press the
“MENU” button to show “SLAVE MODE” on the LCD display.
Press the “ENTER” button to confirm the setting.
Now set the master unit in the program required (static colour, colour change, colour fade or sound).
Once the master unit has been set you need to pair the fixtures. To do this press the
“MENU” button on
the master unit to show “W-DMX” on the LCD display. Now press the “ENTER” button and use the “UP”
and “DOWN” buttons to select “PAIR” . Press the “ENTER” button and the fixture will start to pair.
The master unit will now pair and the slaves will run in sequence with the master unit.
Once the pair is successful the display will stop flashing.
To exit out of any of the above options, press the
“MENU” button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Battery life:
To display the fixtures battery life, press the “MENU” button to show “BATTERY LIFE” o n the LCD display.
The battery life will be displayed. To exit out of any of the above options, press the “MENU” button.
When charging the fixtures charging indicator will illuminate Red.
When the fixture is fully charged the charging indicator will change to green.
Runtime mode:
To set the fixtures runtime, press the “MENU” button on the rear of the unit to show “RUNTIME MODE”
on the LCD display. Press the “ENTER” button and use the “UP” and “DOWN” buttons to select between
“2 Hours” , “4 Hours” , “6 Hours” or “8 Hours” . Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MENU” button.
Please note: In 2 hour runtime mode the fixture will run at 100% brightness. The brightness will be
reduced when the fixture is in 4, 6 or 8 hour runtime modes to prolong the battery life.
Operating instructions