www.prolight.co.uk
Event Spot Rapid RGBW
User Manual
10
Calibration:
To access the calibration, press the
“MENU”
button on the rear of the unit to show
“Calibrate”
on the LCD display. Press the
“ENTER”
button and the display will show
“Password”
, use the
“UP”
and
“DOWN”
buttons until
“050”
is displayed. Press the
“ENTER”
button to confirm the password.
Now use the
“UP”
and
“DOWN”
buttons to select between
“Red”
,
“Green”
,
“Blue”
and
“White”
. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to adjust the values from
“00” - “99”
.
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Wireless DMX indicator information:
When the display is flashing, W-DMX is not paired with other units/transmitter unit or is set to off.
When the display is on and not flashing, W-DMX is paired. To check the status of the W-DMX
see the W-DMX menu in the fixture which will indicate whether it is on or off.
Wireless DMX operation:
To operate the fixture in wireless DMX you will need to connect the fixture to a W-DMX compatible
wireless DMX Transmitter. To pair the fixture and transmitter make sure the display is flashing indicating
no W-DMX signal. First the fixture needs to be set into DMX mode, to do this set the DMX address and
channel mode to what is required, see
DMX mode
.
To turn wireless DMX on, press the
“MENU”
button to show
“W-DMX”
on the LCD display.
Press the
“ENTER”
button use the
“UP”
and
“DOWN”
buttons to select
“RESET”
.
Press the
“ENTER”
button. This will reset the DMX memory and turn W-DMX on.
Press the pair button on the transmitter.
Once the pair is successful the display will stop flashing.
To turn wireless DMX off, press the
“MENU”
button to show
“W-DMX”
on the LCD display. Now use the
“UP”
and
“DOWN”
buttons to select
“OFF”
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
To link multiple Event Spot Rapids via wireless master/slave see
Wireless master/slave operation
.
Clear wireless DMX memory:
To clear the wireless DMX memory, press the
“MENU”
button to show
“W-DMX”
on the LCD display.
Now use the
“UP”
and
“DOWN”
buttons to select
“RESET”
. Press the
“ENTER”
button to erase the
wireless DMX memory. The display will start flashing to show there is no W-DMX signal.
To exit out of any of the above options, press the
“MENU”
button.
Please note: When the fixture is in Master mode the wireless DMX memory of the Transmitter unit and
all receiving units will be cleared. When in Slave mode the wireless DMX memory of that one receiving
unit will be cleared.
Operating instructions
Содержание Event Spot Rapid RGBW Series
Страница 1: ...Order codes LEDJ239 Black Housing LEDJ239A White Housing Event Spot Rapid RGBW User Manual...
Страница 13: ...www prolight co uk Event Spot Rapid RGBW User Manual 13...
Страница 14: ...www prolight co uk Event Spot Rapid RGBW User Manual 14...
Страница 16: ...www prolight co uk Event Spot Rapid RGBW User Manual 16...
