www.prolight.co.uk
Event Spot RGBW MKII
User Manual
8
Built-in programs:
To access the built-in programs, press the
“MENU”
button on the rear of the unit to show
“1.STATIC”
on the LCD display. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to
select one of the 4 built-in programs (static colour, colour change, 4 colour change or colour fade).
1.STATIC
- Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select between
“00” - “99”
for R (Red), G (Green), B (Blue), W (White) and F (Flash).
Press the
“ENTER”
button to confirm the setting.
(00 = LED off/strobe off, 99 = LED at full brightness/strobe fast)
For
2.CHANGE
,
3.CHANG4
and
4.FADE
programs press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the speed from
“00” - “99”
. Press the
“ENTER”
button again and use the
“UP”
and
“DOWN”
buttons to set the strobe speed from
“00” - “99”
.
Press the
“ENTER”
button to confirm the setting.
(00 = speed slow, 99 = speed fast).
To exit out of any of the above options, press the
“MENU”
button.
Sound sensitivity:
To adjust the sound sensitivity, press the
“MENU”
button on the rear of the unit to show
“SOUND
SENS”
on the LCD display. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the
sensitivity from
“00” - “31”
. Press the
“ENTER”
button to confirm the setting.
(00 = low sensitivity, 31 = high sensitivity).
To exit out of any of the above options, press the
“MENU”
button.
IR remote on/off:
To set the IR remote on/off, press the
“MENU”
button on the rear of the unit to show
“IR. REMOTE”
on
the LCD display. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
“ON”
or
“OFF”
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Dimmer response:
To set the dimmer response, press the
“MENU”
button on the rear of the unit to show
“DIMMER”
on the
LCD display. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
“RESP_01”
or
“RESP_02”
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Manual dimming mode:
To access the manual dimming mode, press the
“MENU”
button on the rear of the unit to show
“Manual”
on the LCD display. The unit is now in manual dimming mode. Press the
“ENTER”
button
and use the
“UP”
and
“DOWN”
buttons to set the brightness from
“00” - “99”
. Press the
“ENTER”
button
again and use the
“UP”
and
“DOWN”
buttons to set the strobe speed from
“00” - “99”
.
Press the
“ENTER”
button to confirm the setting.
(00 = LED off/strobe off, 99 = LED at full brightness/strobe fast)
To exit out of any of the above options, press the
“MENU”
button.
Operating instructions
