Ledj Artisan 2000, Руководство пользователя

Страница: 12 / 20

www.prolight.co.uk Artisan 2000 RGBWA Fresnel User Manual
12
Operating instructions
BLACK OUT SELECT PROG FLASH
PROG
F
SET ADDR
S
DMX MODE
D
SPEED
SP
SLAVE/SA
SL
SA
W
R G B
A
0
3 1 2
4 5 6
8 9
+
7
DIMMING
08
01
02
04
07
09
05
10
03
06
09
A B C
E D
01 - Sets the unit into blackout off/on (LED on/off)
02 - Activates the static colours/macros, use the ‘PROG’
button to cycle through static colour and macros modes.
Static colour - use the ‘+’ and ‘–’ buttons to select the
required colour. Use the ‘F’ button followed by the ‘+’ and
‘–’ buttons to set the flash speed
Macros - use the ‘SP’ button followed by the ‘+’ and ‘–’
buttons to adjust the selected macro speed
03 - Activates the strobe, use the ‘+’ and ‘–’ buttons
to adjust the strobe speed
04 - Activates the auto run/macro speed.
Press this button followed by the ‘+’ and ‘–’ buttons to
adjust the program speed
05 - Activates the DMX mode. Press once and use the ‘+’
and ‘–’ buttons to adjust the DMX DMX channel mode.
The LEDs will flash to confirm the channel mode the
fixture is in.
Red - 5 channel
Green - 6 channel
Blue - 7 channel
White - 9 channel
06 - Sets the DMX address, press once followed by three
numeric buttons to set the DMX address required
07 - Activates the auto run mode. Press the ‘SP’ button
followed by the ‘+’ and ‘–’ buttons to adjust the speed.
Press again to activate slave mode.
08 - Activates the manual dimming mode, select one of the
colours below and use the ‘+’ and ‘–’ buttons to select
the brightness between 000-255. Repeat for all 4 other
colours.
09 - Adjusts the colour macros, strobe speed, auto run
speed, macro speed mode, DMX address, DMX channel
mode and manual dimming modes
10 - Sets the DMX address
IR remote functions:
A - Red B - Green C - Blue D - White E - Amber