Ledj Artisan 2000, Руководство пользователя

Страница: 10 / 20

www.prolight.co.uk Artisan 2000 RGBWA Fresnel User Manual
10
Operating instructions
Colour/macro mode:
To access the colour mode, press “MENU” until the display shows “CLR MACS” on the LCD
display. Use the “UP” and “DOWN” buttons to select the required colour/macro speed from
“COLOR: 00” ~ “COLOR: 25” / “MACRO: 26” ~ “MACRO: 44” .
When a colour has been selected, press the “ENTER” button and then use the “UP” and “DOWN”
buttons to select the strobe speed from “00” ~ “99” . Press the “ENTER” button to confirm the setting.
When a macro has been selected, press the “ENTER” button and then use the “UP” and “DOWN”
buttons to select the speed from “00” ~ “99” . Press the “ENTER” button to confirm the setting.
Value: 00 - 99 (00 = no strobe, 99 = fast strobe speed)
Value: 00 - 99 (00 = slow speed, 99 = fast speed)
To exit out of any of the above options, press the “MENU” button.
Auto run mode:
To access the auto run mode, press “MENU” until the display shows “AUTO RUN” on the LCD
display. Use the “UP” and “DOWN” buttons to select the required speed from “00” ~ “99” .
Press the “ENTER” button to confirm the setting.
Value: 00 - 99 (00 = slow speed, 99 = fast speed)
To exit out of any of the above options, press the “MENU” button.
Master/slave mode:
To set the master unit, press the “MENU” button on the master unit to select either the manual mode,
colour/macro mode or auto run mode.
To set the other units in slave mode, press the
“MENU” button on the slave unit to show “SLAVE MODE” .
Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MENU” button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Dimming curves:
To access the fixtures dimming curves, press the “MENU” button to show “DIMCURVE” on the LCD
display. Now use the “UP” and “DOWN” buttons on the rear of the unit to select between “LINEAR” ,
“SQUARE” , “I-SQUARE” and “S-CURVE” . Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MENU” button.
Dimming mode:
To access the fixtures dimming mode, press the “MENU” button to show “DIMMODE” on the LCD display.
Now use the “UP” and “DOWN” buttons on the rear of the unit to select between “HALOGEN” and
“LED” . Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.