6
301 Thor Place, Brea, CA 92821 |
tel
(714) 256-2111 |
fax
(714) 256-2118 | [email protected] |
www.ledconn.com
Details are subject to change without notice. © 2019 LEDCONN CORP. All Rights Reserved.
IG.20.01.R0
I N S T A L L A T I O N G U I D E
SCAN FOR
DIGITAL VERSION
WIRING THE MOLEX
®
CONNECTOR
Red wiring should always be aligned to the
positive charge. Black wiring should always be
aligned to the negative charge.
Make sure that the order of the colored wires
corresponds to the order of the letters near the
Molex
®
connector.
UNDERSTANDING THE MOLEX CONNECTORS FOR TILING
• LUXFLEX sheets may be easily tiled together by taking advantage of the Molex connections provided on each cut sheet.
• One (1) power supply can power multiple panels if total power consumption of panels is lower than the power supply rated power.
• Use Molex-Molex
®
connectors to connect LUXFLEX LED flexible sheets together in "parallel."
MANAGING VOLTAGE DROP
• Keep wires between flexible sheets and power supplies as short as possible to prevent voltage drop.
• We recommend keeping wire gauges no larger than 12AWG and 40ft long for optimal wire management.
• We recommend heavier wire guages for longer distances. For runs longer than 10 ft, please call in for consultation.
CONNECTING A SINGLE PIECE/SHEET
1) To connect a single piece/sheet of LUXFLEX to the power supply, identify the female Molex
®
connector and match the polarity of the DC
Connector according to the polarity indicated next to the female Molex.
2) Make sure that the red wire aligns with the positive charge of the female Molex and that the black wire aligns with the negative charge.
3) The front of the male Molex connector, indicated in the images below, must always be facing up when inserting the wire into the connector.
4) For DC power, connect the DC connector input jack to the power supply. For Hardwiring, connect the hardwire to the power supply
5) Connect power supply to power.
6) LEDs will immediately light up if the wiring is correct.
FEMALE
STANDARD/PREMIUM
MOLEX
®
CONNECTOR
MALE
FRONT
BACK
FEMALE
RGBW
MALE
FRONT
BACK
JUMPER CABLE/TILING CONNECTOR
LUXFLE X
™
Static White & RGBW
FLEXIBLE SHEET
