4
301 Thor Place, Brea, CA 92821 |
tel
(714) 256-2111 |
fax
(714) 256-2118 | [email protected] |
www.ledconn.com
Details are subject to change without notice. © 2019 LEDCONN CORP. All Rights Reserved.
IG.20.01.R0
I N S T A L L A T I O N G U I D E
SCAN FOR
DIGITAL VERSION
POWER & WIRING
Controls, dimmers, split connectors, extension cords, power supplies, and accessories are available
for purchase.
Before wiring to power supply, always turn off electricity at the fuse or circuit breaker box.
ELECTRICAL POWER CONSIDERATIONS
• Use the supplied Class 2 power supply to power the LED flexible sheet. The warranty will be forfeited if a power supply not approved by
LEDCONN is used.
• LUXFLEX sheets are offered with UL & cUL Listed & Recognized Class 2 power supplies. Please check the input voltage for your flexible
sheet and use the power supply that matches the indicated voltage.
• The total power consumption of the lighting fixture must be lower than the rated output power of the power supply and dimming controls.
• Unless otherwise specified, use only Class 2 power supplies rated 24V or less. LUXFLEX is not suited for power supplies that do not comply
with Class 2 or are greater than 24VDC.
• To maintain Class 2 power compliance, do not exceed more than a 96W load.
• Using a power adapter is essential. Never apply direct AC power. Doing so will instantly burn the LEDs, permanently damage the product,
and void the warranty.
• Ensure enough spacing between pieces of assembled LUXFLEX products to avoid conductors shorting against each other.
• Jumpers & hardwire-to-Molex connections are provided with standard 20AWG wires.
• Please refer to pages 6-7 for further instructions on tiling multiple sheets & power consolidation.
DRIVERS & POWER SUPPLIES
• Please refer to LED driver manufacturer's instructions for appropriate dimmer, connection instructions, and usage recommendations.
• Electrical drivers may be remotely mounted. Contact the LEDCONN Engineering team for help if needed.
• LEDCONN will recommend drivers that match the wattage and voltage requirements of LUXFLEX.
B
120Vac
HOT
NEUTRAL
Dark Blue
Brown
Electronic LED Driver
Molex
®
Connector
LUXFLEX™ LED Flexible Sheet
DC Barrel Jack
24VDC Adapter
DC DRIVER TO MOLEX CONNECTOR
HARDWIRE DRIVER-TO-MOLEX CONNECTOR
DIMMING INSTRUCTIONS
1) Connect the power adapter and flexible sheet to the dimmer per
dimmer instructions.
2) Using the dimmer, adjust the light to the desired brightness level.
3) You may use one dimmer for a multi-sheet installation as long as
the total power consumption is lower than dimmer rated power.
4) For optimal performance and brightness, use LEDCONN
recommended compatible dimmers. Consult with LEDCONN
engineers for compatibility concerns.
COMPATIBLE DIMMER TYPES
IN-LINE DIMMER
DIMMER WITH
REMOTE CONTROL
MAGNETIC (MLV)
& 0-10V
LUXFLE X
™
Static White & RGBW
FLEXIBLE SHEET
