background image

| 9

MECHALED

  

1 | Proper use

The luminaire is used for illumination. The luminaire is intended for mounting in a lumi

-

naire holder or mounting bracket.
For connection values see "Technical data". The supply cable is connected to the lumi

-

naire via an M12 plug connection.

  2  |  For safe operation

The operating parameters of the LED luminaire specified on the type plate must cor

-

respond to the supply parameters of the machine or of the transformer.

The safety information and all other information in this manual must 

be followed. Read the entire operating manual carefully before 

mounting and turning on.
Keep the operating manual with the device. It must be stored and 

handed over to third parties when the product is passed on.

Machines can emit voltage spikes due to various factors. These 

voltage spikes in the power supply via machines should be avoid

-

ed: Only use regulated 24V DC switched-mode power supplies, 

not transformers with rectifiers, as these can give rise to voltage 

spikes due to inductance.

Hot plugging should be avoided (connection of the luminaire to a power supply 

 

which is already connected to the mains), since this can lead to the destruction of 

 

the LED luminaire.

Under no circumstances may the luminaire be covered with cloths, 

foils or similar. Object distance from the luminaire should be at 

least 10 cm.

Installation of electrical equipment may only be carried out by quali

-

fied electricians. 

 

Follow the five safety rules according to DIN VDE 1005.

Failure to do so may result in damage to the LED luminaire, as well 

as fire or other hazards.

  3  |  Safety information

Содержание MECHALED













Отзывы: