4/4
MAXIMUM FLEXSTRIP LENGTH SUPPORTED BY LED WORLD’s CLASS 2 POWER SUPPLY
Apply 1 ½” long electrical heat shrink
over all connection points. Secure
connection wire with wire clamp.
IMPORTANT !
Wrong!
4"
(100mm)
On widest one flat plane (only)
Do not bend sideways.
Flexible on one axis
maximum band radius 4”
TROUBLESHOOTING
Ÿ
Consider testing with a multimeter to ensure light strip is receiving 12V power.
LEDs farthest from the power supply are noticeably dimmer
Tape light strip does not light
Ÿ
This is the result of voltage drop. Decrease the length of the 12V power feed or use thicker power feed wires between the 12V power supply
and the lighting strips.
Ÿ
Confirm you have the correct polarity (+ to + and - and -) throughout the run of LED Lighting.
Ÿ
The power supply is not adequate for the length of LED Light Strips you are powering. Install a adequate Class 2 power supply.
Ÿ
Have a electrician check all connections and any switch or dimmer connections from the power supply to the LED Light Strips.
Ÿ
Make sure your power supply is turned on and has the correct voltage.
LED Flex Strip lights blink on, then go off
LED STRIP CUTTING
Our strips comes with cut mark sign. Strips are be cuttable at each 3
LEDs. Cut marks lying between set of soldering points.
-
-
-
-
CONNECTION OPTION
-
Soldered Contacts
BRIGHT PLUS LED STRIP LIGHT
Model
: FA60M28-5M-12V-X (X = COLOR W:Neutral White / WW:Warm White / R:Red / G:Green / B:Blue)
1-800-387-4081
ledworldlighting.com ledworld.ca
|
Copyright © 2021 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 4.2 - 10/14/21
10.9 Feet (Continuous 24 Watts)
Power Supply
Max Feet of LED Flexstrips
Power Supply
Max Feet of LED Flexstrips
MD-012-300VTD52JV2
MD-012-060VTDHV2
21.8 Feet (Continuous 48 Watts)
MD-012-180VTD52JV2
3 X 21.8 Feet (Continuous 48 Watts
each channel)
MD-012-030VTDHV2
5 X 21.8 Feet (Continuous 48 Watts
each channel)
Connect LED light strips with our optional strip connectors. Please refer to our quick
connector instruction sheet included with the connector bag.
However, it is
strongly recommended to solder the connection.
