LED Strip Studio LEC3, Руководство пользователя

Страница: 25 / 43

25
LEC 3 control modes
You can control LEC3 in 4 different ways:
•
Ethernet mode
- using LED Strip Studio software over Ethernet
•
ArtNet mode
– using any ArtNet controller (console or software)
•
DMX mode
– using any kind of DMX controller
•
Stand-alone mode
– you can store several LED animations on your SD card and play
them without any ArtNet/DMX controller or computer.
•
Testing
– great to use different test your installation using standard test patterns.
Ethernet mode
The most common usage of the LEC3 is to use it as LED output for LED Strip Studio
software. The main benefit is the real-time control – you can drag and drop and play
video, generate nice LED effects or even create complete LED show synchronized with
music in the timeline feature of LED Strip Studio.
This is highest priority mode – it automatically stops ArtNet, DMX or auto-play mode.
The DMX IN signal is sent back to LED Strip Studio software. You can use it to control
LED Strip Studio software over DMX. DMX OUT is used by LED Strip Studio software
(typically to control analog LED strips). DMX OUT is not DMX through in this mode!
There is a complete manual available for LED Strip Studio, please check it to find out
more information about it.
Art-Net mode
This mode is automatically activated if there is ArtNet signal coming over Ethernet to
LEC3 device (yellow LED is flashing) and LED Strip Studio software is *not* connected
to LEC3.
There are two ways you can use LEC3 in ArtNet mode:
• Pixel
• SD-Card
You can switch between these two modes in LEC3 Web Configuration.