Lens
LED Strip
Clip the lens into place.
Press and glue the LED Strip Tape into place (follow guides for the 10 mm
strip). Will accept a 14 mm wide strip maximum.
6
5
Endcaps
Feed the lead wires through the endcap. Apply glue to the inner part of
the endcaps. Slide and press the encaps into place.
7
INSTALLATION INSTRUCTIONS
MODELS:
VarioContour 1200 Aluminum Profile
ATTENTION
Please read all safety and assembly instructions prior to installation and keep for future reference.
2
(2)
LED Linear
™
USA, Inc. |
Edition: 20/01/2019
|
LED LINEAR RESERVES THE RIGHTS TO CHANGE SPECIFICATIONS WITHOUT NOTICE
Powering
Ensure the correct (wattage & voltage) power supply is used to power the
tape. Then proceed to connect low voltage wires from extrusion to power
supply. For more information please refer to power supply and LED tape
wiring instructions.
8
Low Voltage
Tape in Aluminum Channel
Line Voltage
Class 2
Power Supply
