Lectrosonics TH3, Руководство по эксплуатации

Страница: 3 / 28

3
Digital Telephone Hybrid
Rio Rancho, NM – USA
FRONT PANEL
The TX LEVEL control is used to set the proper amount of local signal, with the aid of the TX LEVEL meter.
The TELEPHONE RX LEVEL control is used to set the proper telephone receive level, with the aid of the RX LEVEL
meter.
The CODEC RX LEVEL control is used to set the proper codec receive level, with the aid of the RX LEVEL meter.
The CODEC TX TRIM control adjusts the level supplied to the CODEC OUT plug on the rear panel, accommodating
level requirements of the codec.
The LecNet ANTI-ECHO control adjusts the amount of echo reduction applied to a Lectrosonics automatic micro-
phone mixer (e.g. AM8 or AM16) via the LecNet expansion port.
The LecNet ANTI-ECHO, RX LEVEL and TX LEVEL meters aid in setting system audio levels optimally.
The TELEPHONE and CODEC interfaces include the following buttons and indicators.
The CONNECT button initiates or terminates a connection. The CONNECT led indicates an active connection. The
telephone connect led flashes when the telephone line is ringing.
The PRIVACY button mutes either the transmit signal, the received signal, or both, depending on the interface’s
current privacy mode. When the privacy feature is engaged, the PRIVACY led flashes to indicate the current privacy
mode, then glows steadily. Privacy may be disengaged by pressing the button again. For detailed information about
privacy modes, please refer to the Privacy Feature topic in the chapter on BASIC OPERATION.
The RECEIVE VOLUME buttons permit fine control of the receive volume during normal operation. Each button
press alters the receive gain by 1 dB, and the control offers a range of -12 dB to +6dB (19 settings). The default
setting of 0 dB may be restored by pressing both volume buttons simultaneously.
The SWITCHES DISABLED led indicates that the interface buttons on the front panel have been disabled at the
installer’s option. The wired remote controls and serial commands will operate normally.
The POWER switch turns the TH3 on and off. The POWER led serves as a power status indicator.
LECTROSONICS, INC.
RIO RANCHO, NM U.S.A.
DIGITAL HYBRID
LecNet
ANTI-ECHO
TELEPHONE
RX
LEVEL
TX
LEVEL
RX
LEVEL
TX
TRIM
LecNet
ANTI-ECHO
RX
LEVEL
TX
LEVEL
CODEC
POWER
CONNECT PRIVACY
RECEIVE
VOLUME
UP DOWN
TELEPHONE CODEC
SWITCHES
DISABLED CONNECT PRIVACY
RECEIVE
VOLUME
UP DOWN