Lectrosonics TH3, Руководство по эксплуатации

Страница: 22 / 28

22
ACCESSORIES
Standard
21552 15 ft. telephone cable with RJ-11 connectors
21553 9-pin male D-sub connector
21554 Shell for 9-pin D-sub connector
21551 12" mini-DIN LecNet expansion cable
21529 9-pin D-sub to stereo mini plug LecNet PC cable
40024 CH-40 wall transformer
LNETWIN LecNet software
M-TH3 TH3 instruction manual
35679 mini straight slot screwdriver
21580 5-pin depluggable terminal block
Optional
RCW-TEL wall plate remote control unit
RCW-DESK table top remote control unit
21592 24" mini-DIN LecNet expansion cable
GLOSSARY OF TH3 CONCEPTS
AGC
Automatic Gain Control. As used in the TH3, a circuit that compresses telephone receive volume levels, so that
weaker signals sound almost as loud as stronger ones. The trade-off is that background noise levels are also
increased in proportion to the AGC setting.
Bridging
Bridging refers to the interconnection of two otherwise separate interfaces. The TH3 not only has the ability to
communicate via telephone and to communicate via the 4-wire codec interface simultaneously, it has the ability to
bridge the interfaces, such that codec signals are retransmitted over the telephone and vice versa.
Echo Suppression
A process whereby the gains of the transmit and receive paths are altered during a conversation, so that the path
that is least active receives the least gain. This has the effect of reducing both feedback and acoustic echo. The TH3
uses a patented echo suppression algorithm for smooth, transparent operation.
Hybrid
A device that converts a two-wire interface (e.g. the telephone network) to a four-wire interface, by isolating the
transmit and receive paths. The TH3 is a hybrid, with many special features.
Interface
As used in this manual, “interface” is used to distinguish groups of controls associated with the telephone and the 4-
wire codec. (e.g. “Press the CONNECT button for the telephone interface.”)
LecNet Anti-Echo
This is a special echo reduction feature available only when the TH3 is used with a Lectrosonics mixer. It allows the
TH3’s receive signal to participate in the automatic microphone mixing algorithm, so that the local microphones
receive less gain while the remote party is speaking.
Line Echo Canceller
The portion of a hybrid that removes as much as possible of the reflected transmitted signal from the receive path.
The job of the line echo canceller is made difficult by the highly variable conditions encountered on telephone lines.
The TH3 uses a specialized DSP chip for this purpose.