LECTROSONICS, INC.
4
Operating Instructions
Power On
Initial Power On
Timer Screen
Ensure that a new or fully charged battery is
installed.
Press and hold the Power Button for several
seconds until a counter on the LCD progresses
from 1 through 3.
Power Off
Initial Power Off
Timer Screen
Holding the Power Button in and waiting for the
completion of the countdown will turn the power
off.
When the counter reaches “0”, the unit turns off.
Note: If the AUDIO and FREQ buttons are
released before the end of the countdown, the unit will not turn off.
Standby Mode
Standby Screen
A brief press of the Power Button , releasing it
before the counter has reached 3, will turn the
unit on with the RF output turned off. The LCD
will display a reminder that the RF output of the
transmitter is turned off.
Initial Settings
Install a charged battery and go through the
DOWN Button menu to set up
parameters for remote control, power restore and back light. Also go through
the
UP Button menu to define the settings for compatibility mode, RF power
output, input configuration and the step size for frequency increments.
The setup menus are accessed by holding either the UP or DOWN arrow
while powering the unit on. Press the AUDIO button repeatedly to scroll
through the menu items and use the UP and DOWN arrows to select the
values and settings for each item.
NOTE: Some Lectrosonics receivers include an IR (infrared) port
to transfer settings from the receiver to the transmitter. Refer to the
section on IR (infrared) Sync for details.
DOWN Button Menu
Hold the DOWN button while powering up the unit. Then press the AUDIO
button repeatedly to scroll through the following settings. Use the UP and
DOWN arrows to select the available options under each setting.
•
rc (remote control operation); selections: on, oFF
•
PbAc (power-back-on after power loss); selections: 0 (stay turned off),
1 (turn back on)
•
bL (back light duration); selections: 5 (minutes), 30 (seconds),
on (always on)
Содержание SSM
Страница 8: ......
