Lectrosonics SPNTrio, Установка и настройка

Страница: 5 / 36

Installation and Startup Guide
Rio Rancho, NM
5
Headphone Monitor
Used to monitor individual final mix buses as selected
on the LCD. Standard 1/4 inch jack and level control.
Drives both channels of stereo headphones.
LCD
Allows setup and adjustment of most operating param-
eters and for minor adjustments without a computer
interface.
Navigation/Select Control
Used to navigate menus and make value selections and
settings on the LCD.
USB Port
Standard USB connector for the setup and control of
an SPNTrio from a Windows
®
XP, Vista or 7 computer
system* with USB interface.
Status LEDs
Comm LED - blinks to indicate USB, RS-232 and ether-
net communication
Alert LED - blinks to indicate fault or error, glows white
during firmware updates
Power LED - glows to indicate power ON
Front Panel
The SPNTrio includes a front panel LCD and rotary
style navigation control for adjustment without the need
for a computer interface. The headphone output is used
to monitor each final mix for diagnostics and system
checkout.
POWER Switch USB Port
Comm LED Headphone Monitor
Navigation/Select
Control LCD
Alert LED
Power LED
Blue LEDs on the right side of the front panel indicate
power status and communications through USB, serial
and ethernet ports. The center white LED blinks to indi-
cate an error, and glows during firmware updates.
*Windows is a registered trademark of Microsoft Corp.