www.lectrosonics.com
7
Mode 3 is a special compatibility mode for use with another brand of wireless.
Contact the factory for details.
200 Series works with legacy Lectrosonics models such as all UM200,
UH200 and UT200 Series transmitters.
100 Series works with Lectrosonics UM100 transmitters.
EU Dig. Hybrid works with Lectrosonics European Digital Hybrid transmitters
with model numbers that end in “/E01.” For example, the SMDB/E01 transmit-
ter is in this group.
300 Series works with legacy Lectrosonics transmitters that were sold in
Europe, such as the UM300B and UT300.
Mode 7 is a special compatibility mode for use with another brand of wireless.
Contact the factory for details.
Mode 6 is a special compatibility mode for use with another brand of wireless.
Contact the factory for details.
IFB works with Lectrosonics models such legacy analog models bearing “IFB”
in the model number, or Digital Hybrid Wireless models that offer the IFB com-
patibility mode.
4) Find a Clear Frequency with Smart Tune
TM
Optimum range will be realized if the system is set to a frequency where few
or no other RF signals are present (a “clear” frequency). The receiver can
select a clear frequency automatically with Smart Tune
TM
.
Navigate to Smart Tune in the LCD menu and press MENU/SEL to start the
process. Select the desired range to be scanned, then press MENU/SEL to
start the scan.
Entire tuning range
Individual
blocks
(NA) North American
versions
NOTE: “NA” next to the block numbers indicates the North American
version which excludes the radio astronomy band from 608 to 614
MHz.
