Lectrosonics HMa, Инструкция по эксплуатации

Страница: 13 / 24

Wideband Digital Hybrid ® Plug-On Transmitter
Rio Rancho, NM
13
LectroRM
By New Endian LLC
LectroRM is a mobile application for iOS and Android
operating systems. Its purpose is to remotely control
Lectrosonics Transmitters, including:
• SM Series
• WM
• L Series
• HMa, HMa/E01
The app remotely changes settings on the transmit-
ter through the use of encoded audio tones, which
when received by the attached microphone, will alter
the configured setting. The app was released by New
Endian, LLC in September 2011. The app is available
for download and sells for $20 on the Apple App Store
and Google Play Store.
LectroRM’s remote control mechanism is the use of an
audio sequence of tones (dweedles) that are interpret-
ed by the transmitter as a configuration change. The
settings available in LectroRM are:
• Audio Level
• Frequency
• Sleep Mode
• Lock Mode
User Interface
The user interface involves selecting the audio se-
quence related to the desired change. Each version
has an interface for selecting the desired setting and
the desired option for that setting. Each version also
has a mechanism to prevent accidental activation of
the tone.
iOS
The iPhone version keeps each available setting on a
separate page with the list of options for that setting.
On iOS, the “Activate” toggle switch must be enabled
to show the button which will then activate the audio.
The iOS version’s default orientation is upside-down
but can be configured to orient right-side up. The
purpose for this is to orient the device’s speaker, which
is at the bottom of the device, closer to the transmitter
microphone.
Android
The Android version keeps all settings on the same
page and allows the user to toggle between the
activation buttons for each setting. The activation
button must be long pressed to activate. The Android
version also allows users to keep a configurable list of
full sets of settings.
Activation
For a transmitter to respond to remote control audio
tones, the transmitter must meet certain requirements:
• The transmitter must not be turned off; it can
however be in sleep mode.
• The transmitter must have firmware version
1.5 or later for Audio, Frequency, Sleep and
Lock changes.
• The transmitter microphone must be
within range.
• The transmitter must be configured to enable
remote control activation.
Please be aware this app is not a
Lectrosonics product. It is privately owned
and operated by New Endian LLC,
www.newendian.com.