Lectrosonics DMPA12, Справочное руководство

Страница: 29 / 56

Reference Manual
Rio Rancho, NM 2
At times it may be necessary to restore limiter settings
to their default values (+15dBu threshold, with default
time constant). To do this right click within the Limiter
setup group and choose Set to default values from the
popup menu.
Amplitude response graph
Each output channel page contains a graph which dis-
plays four plots:
• A fixed plot for the 1:1 amplitude response used for
reference (dashed grey line)
• The amplitude response of the compressor
(orange line)
• The amplitude response of the limiter
(dashed red line)
• Total response, the amplitude response of the com-
pressor and limiter plus makeup gain (blue line)
A handle is provided for use as an alternative way to
change the limiter threshold (red) with the mouse. Left
click on a handle and move the mouse while keeping
the left mouse button down until the handle is posi-
tioned as you like. Release the left mouse button and
the adjustment is complete. As you do this the related
numerical control will be updated with the exact value
corresponding to the position of the handle. The limiter
threshold handle moves along the vertical axis.
Gain reduction meter
This meter displays the reduction in gain (in dB) that
results from limiter activity.
Compressor status indicators
These display the compressor status for all outputs. If
the compressor for a particular output channel becomes
active, the corresponding indicator is lit yellow.
Limiter status indicators
These display the limiter status for all outputs. If the
limiter for a particular output channel becomes active,
the corresponding indicator is lit red.