Lectrosonics DMPA12, Справочное руководство

Страница: 25 / 56

Reference Manual
Rio Rancho, NM 2
Amplitude response graph
Each output channel page contains a graph which dis-
plays four plots:
• A fixed plot for the 1:1 amplitude response used for
reference (dashed grey line)
• The amplitude response of the compressor (orange
line)
• The amplitude response of the limiter (dashed red
line)
• Total response, the amplitude response of the com-
pressor and limiter plus makeup gain (blue line)
Three handles are provided for use as an alternative
way to change the compressor threshold (orange),
compression ratio (green) and makeup gain (blue) with
the mouse. Left click on a handle and move the mouse
while keeping the left mouse button down until the
handle is positioned as you like. Release the left mouse
button and the adjustment is complete. As you do this
the related numerical control will be updated with the
exact value corresponding to the position of the handle.
The compressor threshold handle moves along the
1:1 response diagonal, and the makeup gain and ratio
handles move along the vertical axis.
Gain reduction meter
This meter displays the reduction in gain (in dB) that
results from compressor activity.
Compressor status indicators
These display the compressor status for all outputs. If
the compressor for a particular output channel becomes
active, the corresponding indicator is lit yellow.
Limiter status indicators
These display the limiter status for all outputs. If the
limiter for a particular output channel becomes active,
the corresponding indicator is lit red.
1:1 reference
amplitude response
(dashed grey)
Limiter threshold (dashed red)
Compressor response
(dashed orange)
Total response
(solid blue)