Lectronics Long Ranger LRIII-MB, Сервисный бюллетень

Страница: 3 / 4

Attach the terminal cover as shown. The screw
secures the terminal cover and the battery retainer
to the mounting bracket.
Slide the new battery into the mounting bracket as
shown. Keep the wiring connectors from touching
the battery terminals while installing the battery.
9.
Attach the battery retainer to mounting bracket
with two screws as shown.
10.
12.
Connect battery wires to the lugs on the battery.
Slide the connectors all the way onto the lugs.
11.
See note
below
NOTE: The neg (-) connector does not slide
onto the lug as far as the pos (+) connector. The
appearance in the photo above is normal when both
connectors are correctly attached