LeCroy USB Protocol Suite Advisor T3, Руководство пользователя

Страница: 77 / 388

USB Protocol Suite User Manual Chapter 3: Installation
LeCroy Corporation
63
To add a device, click Add to display the USB3 Device -> Analyzer ->
Host Signal Parameter Profiles dialog.
The dialog allows you to Set Device “Current” or Read from Analyzer .
The dialog allows you to Set Host “Current” or Apply to Analyzer .
You can enter Device to Analyzer Signal Settings:
• Device Name
• Device Cable ID
• Input Signal Equalization (ISE) Settings : Short, medium and long time
constant (Current, Off, Minimum, Moderate, or Maximum)
• Pre-Emphasis Settings : Short and long time level (0 to 15) and
short and long time decay (0 to 7)
• Output Power Level : Current, or 213 mV to 1294 mV
You can enter Host to Analyzer Signal Settings:
• Host Name
• Host Cable ID
• Input Signal Equalization (ISE) Settings : Short, medium and long time
constant (Current, Off, Minimum, Moderate, or Maximum)
• Pre-Emphasis Settings : Short and long time level (0 to 15) and
short and long time decay (0 to 7)
• Output Power Level : Current, or 213 mV to 1294 mV
You can also Load the default settings or Load the last applied settings .