7
EMBEDDED SYSTEM DESIGN AND DEBUG
Successful design and debug
of an embedded system
requires monitoring a wide
range of signals at any given
time. The WaveSurfer Xs-A
and MXs-A oscilloscopes can
be made in to an all-in-one
tool for capturing analog,
digital and serial signals
simultaneously.
High-performance MSO
Capture digital signals up to 500 MHz
with up to 50 Mpts/Ch memory,
2 GS/s, and 18 or 36 channels by
adding the MS-500 or MS-250 to any
model WaveSurfer. Create analog and
digital cross-pattern triggers of up to
4 analog and 36 digital channels and
view the data as individual lines or
in a bus view.
I
2
C, SPI, UART, RS-232, USB
Audiobus (I
2
S, LJ, RJ, TDM),
MIL-STD-1553, ARINC 429,
MIPI D-PHY, DigRF, CAN and
LIN Serial Trigger and Decode
Quickly and easily isolate specific
serial data events on your embedded
controller for better understanding and
faster debug with trigger conditions
in binary or hexadecimal formats.
The conditional data trigger allows
for triggering on a range of values.
Intuitive, Color-coded
Decode Overlay
Advanced software algorithms decon-
struct the waveform into binary, hex,
or ASCII protocol information, then
overlay the decoded data on the wave-
form. Various sections of the protocol
are color-coded to make it easy to
understand. The decode operation is
fast—even with long acquisitions.
Table Summary and
Search/Zoom
Turn your oscilloscope into a protocol
analyzer with the Table display of
protocol information. Customize the
table, or export Table data to an Excel
file. Touch a message in the table and
automatically zoom for detail. Search
for specific address or data values in
the acquisition.
