Embedded Controller
Design and Debug
Save time when working with
embedded controllers by adding
high-performance mixed signal
capability to the WaveSurfer. Capture
digital signals up to 500 MHz with
up to 50 Mpts/Ch memory, 2 GS/s
and 18 or 36 channels. Quickly and
easily isolate specific serial data
events with optional I
2
C, SPI, UART,
RS-232, USB, Audiobus (I
2
S, LJ, RJ,
TDM), MIL-STD-1553, ARINC 429,
MIPI D-PHY, DigRF, CAN and LIN
trigger and decode options.
ZS Series High Impedance
Active Probes
The ZS Series of high impedance
active probes provide full bandwidth at
the probe tip, and the high impedance
(1 M
Ω
|| 0.9 pF) you want. A variety
of standard and available probe tip
and grounding accessories are offered
to meet any requirement. What’s more,
ZS Series probes are available for a
very affordable price. Use the ZS1000
with 200 to 600 MHz WaveSurfers and
the ZS1500 with 1 GHz WaveSurfers
to give full system bandwidth at the
probe tip.
3
Long Capture Time
With 5 Mpts/Ch (10 Mpts/Ch with
MXs-A) of fast acquisition memory
standard the WaveSurfer provides
long capture time at full sample rate,
and longer times at lower sample
rates. WaveSurfer long memory is
also thoughtfully designed to respond
quickly, even when measurements,
math, or serial decoders are being used.
WaveStream Fast
Viewing Mode
WaveStream provides a vibrant,
intensity graded (256 levels) display
with a fast update to closely simulate
the look and feel of an analog
oscilloscope. Turn WaveStream ON
or OFF, and adjust intensity, using
the front panel knob. Use it only
when you want to.
WaveScan Advanced Search
WaveScan allows searching in a
single acquisition using more than
20 different modes. Or, set up a
Scan condition and scan for an event
over hours or days, and perform
some action when it is found. The
MS-250 or MS-500 mixed signal
options add the ability to search
digital channels as well as analog.
Touch Screen Simplicity
Keep your testing efficient with a
thoughtfully designed user interface
that provides the busy engineer with
a GUI that is smooth, transparent, and
easy to use. Use the touch screen
to quickly access all triggers, math
functions and measurement parameters
or to “draw a box” around the area
of interest and zoom all channels to
the desired area.
