MS-500 Mixed Signal Oscilloscope Option
24
ISSUED: June, 2009
MS-500-OM-E Rev C
Additional capability is described in the following table:
Provides a method to quickly turn all digital lines in
the Digital trace group OFF or ON. The default is
for all digital lines to be ON. As lines are turned
OFF, they automatically resize to take up more of
the grid and be easier to see.
There are no dedicated front panel controls for
Digital line position or size. However, you can
touch these controls twice and enter in a unit-less
value for position and size using the pop-up
keypad. Or you can touch them once, and use the
front panel adjust knob to change the value.
Another way is to activate the Digital trace group
by touching the trace descriptor label once and
then using the front panel channel controls (V/div
and Offset) to adjust the position and size.
You can view a group of digital traces as individual
lines (Expand mode), like this:
Or collapsed into a bus (Collapse mode), like this:
Just select the appropriate button to get the view
that you want.
