WaveSurfer Accessory
(h) Starting the Print-out
A hardcopy of the screen on the WaveSurfer is printed out. The
following describes the printing area.
•
Strip chart:
Prints out the waveform portion on the screen and
the basic setup data. In this mode, the waveform
area is printed out with it enlarged.
•
Hardcopy of screen on main unit:
Prints out the whole screen.
The print setup and print start are and controlled through the
WaveSurfer.
The contents of the print setup are set in the “Utilities Hardcopy”
dialog box, (available in the WaveSurfer). For further information
on operation, see the Getting Started Manual supplied with the
WaveSurfer, or reference the on-line help.
The following describes the operation steps.
1. Touch [File] in the menu bar of the WaveSurfer screen, and then
touch [Print Setup...] in the drop-down menu. The “Utilities
Hardcopy” dialog box will be opened.
2. Select the printer icon
at the left portion of the
“Hardcopy” dialog box setup window.
3. Touch a blank spot in the “Select Printer” field. Select
"LeCroy External USB Printer" from the pop-up menu of the
touch pad.
When selecting “Strip Chart,”, the option to select a waveform
enlargement ratio becomes available. Click it to open the dialog
box and select a desired enlargement ratio.
4. Start printing with either operating procedure shown below.
•
Touch the Print icon
at the right portion of the
setup window.
19
