Mygo Seat - Size 3 Stander User Manual
p37
11.20 FLAT HEADREST
WITH LATERAL
SUPPORTS
To adjust the height, depth and angle
of the flat headrest, adjust using
the hand levers , as shown on the
contoured head support.
To adjust the width of the laterals
loosen plastic knob
, slide to
desired position and tighten securely.
11.21 ARMREST
ADJUSTMENT
To adjust the height of the armrest
loosen the hand knob
, set to
the desired height and retighten.
To adjust the angle, rotate ratchet
handle until the desired position
has been achieved.
Always use caution as
fingers could become
trapped in the slot when
adjusting the height.
11.22 TRAY
ADJUSTMENT
The height and angle of the tray
are set by adjusting the armrests as
detailed above. To remove or adjust
the depth of the tray loosen the
knobs under the armrest, set to
To remove the armrest completely,
loosen ratchet handle
,
press
popper
and lift the armrest.