
2
Putting on the Upsee
Step 1
Adult Belt
1. Place the belt low around your hips,
roughly 2 inches below your waist
with the top of the triangular back
support pointing upwards*. Clip
together.
Wearing the belt too high around your
waist may cause back strain.
Step 2
Child Harness
Laying the harness flat and placing the
child into it on his back is the easiest
method.
1. Lay the Upsee on a comfortable
surface.
2. Lay the child back into the harness,
matching their pelvis, chest and
underarms to the vest.
2. Pull both ‘D’ rings away from the
centre buckle to tighten the belt*.
Ensure the webbing does not
become twisted.
The belt needs to be tight enough so
the child’s weight cannot not pull it
down below the hips.
*Triangular back support should be
worn as pictured on adults back
*Triangular back support should be
worn as pictured on adults back